Best Cooling Solutions for GPU Clusters
All postsTechnology

Best Cooling Solutions for GPU Clusters

Synapse Thermal·October 22, 2026

Comparing the best cooling solutions for GPU clusters, from Synapse Thermal's autonomous DRL optimization software to Vertiv, CoolIT, Schneider Electric, LiquidStack, Accelsius, and nVent hardware.

High-density GPU clusters concentrate substantial heat in accelerators, CPUs, memory, networking equipment, and power components. As rack densities increase, data center operators need cooling architectures that can remove the required heat while controlling energy consumption, protecting thermal operating conditions, and supporting future compute capacity.

Cooling performance depends on more than the cooling device alone. Chip heat flux, server design, coolant supply temperature, flow rate, facility heat rejection, and changing AI workloads all affect operating conditions. A U.S. national laboratory noted in January 2025 that, by some estimates, cooling systems can account for as much as 40% of a data center's annual energy consumption. That is an upper-end estimate, not a representative share for every facility. Physical cooling equipment provides heat-transfer capacity, while autonomous optimization software can coordinate the available infrastructure as demand changes. For facilities in the United States and Europe, the strongest strategy may combine both.

This guide examines seven solutions for GPU clusters, with Synapse Thermal ranked first for AI-powered autonomous cooling optimization across existing equipment. The remaining entries cover physical cooling infrastructure, direct-to-chip systems, immersion cooling, and integrated power and cooling platforms.

Key Takeaways

  • Synapse Thermal is the leading software-first choice in this list. Synapse positions its proprietary deep reinforcement learning (DRL) software as a unified, cooling-focused supervisory agent for closed-loop optimization across compatible HVAC, computer room air conditioning (CRAC), chilled-water, direct-to-chip liquid-cooling, and immersion equipment. This combines autonomous control, broad cooling-equipment applicability, and on-premise inference.
  • Synapse pairs predictive optimization with published deployment and payback figures. The company describes thermal-load forecasting 15 to 30 minutes ahead, deployment in 4 to 6 weeks, and full investment return in 8 to 14 months through energy savings alone. These are company-stated capabilities and outcomes, with facility results depending on operating conditions.
  • A cooling-control efficiency comparison is different from whole-facility savings. Synapse reports 35% to 40% greater energy efficiency for its DRL cooling-control approach compared with traditional PID and rule-based approaches. That comparison is not a 35% to 40% reduction in total facility energy. Its published 1.03 PUE is a potential optimal outcome, not an achieved site measurement or guaranteed PUE.
  • Direct-to-chip liquid cooling is an important physical solution for dense GPU racks. Vertiv, CoolIT Systems, Schneider Electric, and nVent offer equipment for moving heat from IT systems into liquid and facility cooling loops.
  • Immersion and two-phase systems serve different thermal designs. LiquidStack offers immersion and direct-to-chip infrastructure, while Accelsius focuses on two-phase direct-to-chip cooling. Appropriate architecture depends on the complete server, rack, and facility design.
  • Software and cooling hardware can be complementary. Synapse's supervisory optimization approach can support efficient operation of appropriately equipped cooling plants while dedicated hardware handles the physical heat-removal duty.

GPU Cluster Cooling Solutions at a Glance

PlatformPrimary FocusKey FeaturesBest For
1. Synapse ThermalAI-powered autonomous cooling optimizationProprietary closed-loop DRL agent, company-described LSTM forecasts 15 to 30 minutes ahead, on-premise inference, and stated category-level integration with air, chilled-water, direct-to-chip, and immersion coolingU.S. and European facilities prioritizing predictive energy optimization on existing cooling equipment
2. VertivIntegrated liquid-cooling infrastructureCoolChip CDU 70 (70 kW at an 11°C approach, liquid-to-air), CDU 2300 (2.3 MW at a 4°C approach, liquid-to-liquid), coolant distribution, and heat-rejection equipmentNew builds, expansions, and selected liquid-cooling retrofits
3. CoolIT SystemsDirect-to-chip coldplates and CDUsOMNI and Split-Flow coldplates; separate 4 kW and 15 kW coldplate design demonstrations; nominal 2 MW CHx2000 CDUGPU systems designed for OEM-qualified direct liquid cooling
4. Schneider ElectricIntegrated cooling, power, and monitoringAnnounced 105 kW to 3.5 MW individual-CDU range at specified duty points; hybrid air and liquid cooling; EcoStruxure IT monitoringFacilities planning coordinated cooling and electrical infrastructure
5. LiquidStackImmersion cooling and modular liquid distributionSingle-phase and two-phase immersion offerings; GigaModular direct-to-chip CDU platform tested in coordinated multi-module configurations up to 14 MWCompatible immersion installations and phased direct-to-chip deployments
6. AccelsiusTwo-phase direct-to-chip coolingNeuCool technology; up to 150 kW IR150 integrated rack; separately reported 4,500 W socket and 250 kW rack testsGPU projects assessing two-phase coldplates and integrated rack cooling
7. nVentCDU hardware and AI infrastructure designRackChiller CDU800 rated above 800 kW at its stated operating point; joint Siemens and nVent 100 MW GB200-oriented reference architectureProjects based on liquid-cooling specifications and coordinated power designs

1. Synapse Thermal

Synapse Thermal is the top choice in this guide for operators prioritizing autonomous energy optimization alongside GPU cooling capacity. Rather than centering its offering on a new chiller, CDU, or immersion tank, Synapse applies proprietary DRL software to the cooling infrastructure a facility already operates. Synapse positions its proprietary DRL software as a unified cooling-focused supervisory agent designed to coordinate compatible HVAC, CRAC, chilled-water, direct-to-chip liquid-cooling, and immersion equipment categories.

That positioning is particularly relevant when GPU growth places pressure on an existing site's electrical budget. Synapse focuses on aligning cooling power with thermal demand, supporting electrical headroom and providing facility teams with predictive operating information. Physical cooling systems continue to remove and reject heat, while Synapse coordinates controllable cooling resources to pursue energy efficiency within thermal constraints.

Core Technology: Predict, Optimize, and Adapt

Synapse describes an integrated cooling-control process with four stages:

  • Real-time monitoring: Available temperature, humidity, workload, and power telemetry informs the current cooling state. The objective is to connect infrastructure operation with the thermal demand created by IT workloads.
  • Predictive analytics: Long short-term memory (LSTM) neural networks forecast thermal-load trajectories 15 to 30 minutes ahead. This provides a forward-looking input to cooling decisions as GPU utilization and environmental conditions change.
  • Closed-loop DRL optimization: A proprietary reinforcement learning agent selects cooling actions intended to minimize energy consumption while maintaining thermal operating constraints. Synapse describes automated adjustment of controllable fan speeds, chilled-water flow rates, and liquid-cooling loops.
  • Continuous learning: The optimization approach adapts its policies using operational data, including seasonal conditions, workload shifts, and changes in equipment performance.

This is a cooling-first autonomous control architecture, rather than monitoring alone. Conventional equipment feedback can regulate local temperatures and flows; Synapse's differentiating proposition is predictive, coordinated optimization across available cooling resources.

Key Differentiators for GPU Cluster Operators

  • Unified DRL approach across cooling categories: Synapse describes its proprietary DRL agent as applicable to air cooling, chilled-water systems, direct-to-chip liquid cooling, and immersion cooling. This makes it relevant to facilities with mixed equipment and evolving GPU cooling architectures.
  • On-premise inference: Synapse states that model inference runs on-premise, with no cloud dependency for its mission-critical control loop. It also describes microsecond inference latency, a specification concerning model inference itself.
  • Hardware-agnostic integration: Synapse's retrofit-first approach is designed to operate with existing controllable cooling equipment without requiring wholesale replacement. It can therefore complement both established air-cooling systems and newer liquid-cooling investments.
  • Energy and thermal objectives: The DRL system is described as minimizing cooling energy while maintaining thermal constraints. This focuses the optimization objective on cooling performance instead of treating equipment monitoring or broad IT orchestration as the same function.
  • Electrical headroom and capacity planning: Reducing cooling power demand during peak or power-constrained periods can release electrical capacity for GPUs within a fixed site power allocation. Annual energy savings and peak-demand reductions are distinct outcomes; cooling telemetry and operating forecasts can also inform planning alongside actual thermal capacity and rack requirements.

The combination of autonomous DRL, on-premise execution, broad equipment applicability, and retrofit-oriented deployment is the basis for Synapse's first-place position in this list.

Energy Efficiency and Potential PUE

Synapse reports 35% to 40% greater energy efficiency for its DRL cooling-control approach compared with traditional PID and rule-based controls. This is a company-reported comparison of cooling-control approaches, not a measured 35% to 40% reduction in an individual facility's cooling electricity bill, total facility electricity use, or PUE.

For power usage effectiveness (PUE), Synapse presents 1.03 as a potential optimal PUE with its optimization. It is an aspirational optimal operating outcome, not an already achieved or guaranteed facility result. PUE is calculated as total facility energy divided by IT equipment energy, so the resulting site value reflects the complete power and cooling architecture as well as actual operations.

The commercial importance extends beyond the PUE ratio. When optimization reduces cooling power demand during electricity-constrained operating periods, it can release electrical capacity for IT equipment while maintaining required thermal conditions. Separately, reductions in annual cooling electricity use can lower operating costs and inform decisions about future chiller, computer room air handler (CRAH), and CDU investments.

Deployment, Analysis, and ROI

Synapse advertises deployment in 4 to 6 weeks built around existing equipment rather than a rip-and-replace cooling project. Its approach centers on available plant telemetry, controllable interfaces, and facility-specific cooling conditions. Synapse also identifies itself as Techstars-backed and describes relationships with engineering, procurement, and construction (EPC) organizations. Its U.S. Southwest footprint, including New Mexico, provides additional regional context for its work in data center cooling optimization.

The company also offers a complimentary DRL efficiency analysis. Its Cooling Analysis page describes an assessment using plant topology and passive telemetry, with a zero-disruption analysis process and a mutual NDA option. The analysis is intended to estimate the energy-reduction opportunity against the facility's baseline controller.

Synapse states that customers achieve full investment return in 8 to 14 months through energy savings alone. This is a company-reported payback proposition, and a particular facility's economics reflect its cooling-energy baseline, electricity costs, integration scope, and realized savings.

Best fit: U.S. and European data centers that want autonomous, predictive optimization of existing cooling assets, especially sites pursuing more GPU compute within a constrained power budget or coordinating air and liquid cooling during an AI infrastructure expansion.

2. Vertiv

Vertiv supplies cooling and supporting infrastructure for AI and high-performance computing environments. Its portfolio includes CoolChip CDUs, liquid distribution components, direct-to-chip infrastructure, rear-door heat exchangers, heat-rejection equipment, monitoring, and associated services.

Cooling Portfolio

  • CoolChip CDU 70: A liquid-to-air CDU rated 70 kW at an 11°C approach temperature difference in Vertiv's published specifications, positioned for selected retrofit configurations.
  • CoolChip CDU 2300: A liquid-to-liquid CDU introduced for European applications in May 2026, with a published rating of 2.3 MW at a 4°C approach temperature difference. Actual thermal duty also depends on flow and facility conditions.
  • Direct-to-chip and rack cooling: Vertiv supplies coolant distribution and rack-adjacent cooling elements used with liquid-cooled high-density systems.
  • Reference architecture and controls: Vertiv's 360AI offering includes coordinated power and cooling designs for AI systems, while CoolChip equipment includes control of coolant temperature and flow.

Deployment Considerations

Vertiv's equipment can form part of new installations, expansions, and selected retrofits in the United States and Europe. The required CDU arrangement depends on rack heat load, coolant conditions, residual air-cooling duty, facility piping, and heat rejection.

Its CDUs include operational controls for equipment-level coordination. Synapse addresses a distinct layer of the cooling strategy through predictive DRL optimization across facility cooling resources.

Best fit: Operators procuring the physical coolant distribution, rack cooling, and heat-rejection infrastructure for high-density GPU systems.

3. CoolIT Systems

CoolIT Systems develops direct liquid-cooling hardware for AI servers and high-performance computing. Its portfolio includes coldplates, server liquid loops, manifolds, CDUs, and related engineering services.

Technology Highlights

  • OMNI and Split-Flow coldplates: CoolIT describes all-metal coldplate construction and a Split-Flow microchannel architecture intended to distribute coolant over high-heat-flux components.
  • 4 kW development design: A separately reported OMNI and Split-Flow coldplate design addressed 4 kW of thermal load and heat flux above 300 W/cm² under its stated test conditions.
  • 15 kW demonstration: In June 2026, CoolIT announced a 15 kW single-phase coldplate design demonstration using a water-glycol coolant at 1.2 L/min/kW, with thermal performance described for a 45°C warm-water environment. This is a coldplate design test, not a statement that a production GPU consumes 15 kW.
  • CHx2000 CDU: CoolIT introduced the row-based CHx2000 with 2 MW nominal cooling capacity in April 2025. Its actual duty depends on coolant flow, approach temperature, and facility conditions.

GPU Cluster Applications

CoolIT's direct-to-chip architecture transfers heat from selected chips to a liquid circuit and into coolant distribution infrastructure. Its published CHx2000 announcement includes a design application involving NVIDIA GB200 NVL72 racks.

These coldplate and CDU specifications address different parts of the cooling chain. Rack-level deployment is shaped by the server's thermal design, OEM-qualified components, coolant properties, and facility heat-rejection system.

Best fit: High-density GPU configurations engineered for single-phase direct liquid cooling, with coldplates and distribution systems matched to their server architecture.

4. Schneider Electric

Schneider Electric combines data center electrical infrastructure, thermal equipment, and monitoring software. Its Motivair liquid-cooling portfolio includes CDUs, coldplates, and related infrastructure, while its EcoStruxure offerings support power and cooling visibility.

Cooling and Monitoring Portfolio

  • Motivair CDUs: In September 2026, Schneider Electric described an individual-CDU portfolio ranging from 105 kW to 3.5 MW.
  • WCDU capacity: The announced WCDU is rated at up to 3.5 MW at 1.5 L/min/kW, or 2.5 MW at 2.0 L/min/kW. These are different operating points for the same product, not interchangeable capacities.
  • Hybrid cooling configuration: The WCDU is designed for integration with fan-wall air-cooling systems as well as liquid-cooling architectures.
  • EcoStruxure IT: Schneider Electric's monitoring ecosystem includes support for Motivair liquid-cooling information in Data Center Expert, alongside broader power and environmental monitoring functions.

Schneider Electric stated in September 2026 that the WCDU was scheduled to begin shipping in selected regions in October 2026, with U.S. pre-orders planned for early 2027. A separate announcement described centrally controlled, multi-CDU configurations scaling to 10 MW and beyond; that scale should be understood as a coordinated system, not as a single CDU rating.

Organizational Fit

Schneider Electric is relevant to facilities coordinating electrical distribution, liquid cooling, hybrid air cooling, and infrastructure monitoring. Its physical equipment and monitoring portfolio can sit alongside supervisory cooling optimization software as part of a wider operating architecture.

Best fit: U.S. and European data centers that organize cooling, electrical infrastructure, and monitoring through an integrated supplier portfolio.

5. LiquidStack

LiquidStack supplies direct-to-chip coolant distribution infrastructure and immersion cooling technology. These approaches transfer heat through different server-side mechanisms and therefore suit different facility designs.

Technology Options

  • Single-phase immersion: Compatible IT equipment is submerged in a dielectric liquid that remains in the liquid phase during the designed operating cycle.
  • Two-phase immersion: Compatible equipment is immersed in a fluid that vaporizes as it absorbs heat, with condensation and heat rejection handled within the cooling system.
  • Direct-to-chip CDUs: LiquidStack also provides infrastructure that moves heat from liquid-cooled server components through a dedicated coolant distribution network.
  • GigaModular CDU platform: In May 2026, LiquidStack announced commercial availability of its modular CDU platform following multi-module testing up to 14 MW. That rating applies to a coordinated direct-to-chip CDU platform, not to one immersion tank or a single 14 MW CDU appliance.

Performance and Facility Fit

Immersion can reduce selected server air-cooling requirements, while direct-to-chip designs move heat away from processors through attached coldplates. In both cases, the facility's pumps, heat exchangers, distribution systems, and heat rejection influence total energy use.

PUE describes the complete data center rather than an individual immersion tank or CDU. Warm-liquid cooling can also support waste-heat recovery where coolant temperatures and a local heat user align.

Best fit: Planned immersion installations with compatible IT equipment, or high-density GPU projects using modular direct-to-chip coolant distribution.

6. Accelsius

Accelsius develops NeuCool, a two-phase direct-to-chip cooling architecture for high-heat-flux processors and GPU racks. Refrigerant absorbs heat through phase change at the coldplate and releases it through condensation within the designed cooling system.

Technology Specifications

  • 4,500 W socket demonstration: In April 2025, Accelsius reported a laboratory test using a thermal test vehicle representing a GPU socket at 4,500 W. The figure describes an engineering test vehicle, not a commercially deployed GPU's operating power.
  • 250 kW rack test: Accelsius separately described an in-row system cooling a 250 kW AI rack, including testing with facility-water temperatures up to 40°C under specified conditions.
  • NeuCool IR150: The company announced general availability in 2026 of an integrated rack offering with a two-phase CDU, liquid and vapor manifolds, rack space, and up to 150 kW of cooling capacity.
  • IT-side cooling loop: The NeuCool approach uses a water-free refrigerant loop at the IT equipment, while facility-side heat rejection depends on the installed system design.

Cooling Mechanism and Applications

Two-phase direct-to-chip cooling uses refrigerant vaporization to absorb local heat and condensation to move it toward heat rejection. The engineering design determines operating pressure, thermal duty, coolant distribution, and facility integration.

Accelsius's reported socket, rack, and integrated-equipment capacities are separate specifications. They provide different views of the architecture rather than one common rating for an installed GPU system.

Best fit: Facilities evaluating two-phase direct-to-chip cooling for high-heat-flux GPU components or integrated liquid-cooled racks.

7. nVent

nVent provides liquid-cooling infrastructure, including its RackChiller CDU family. In December 2025, Siemens and nVent announced a joint reference architecture intended for AI data centers designed around large liquid-cooled GPU systems.

Product and Reference Design

  • RackChiller CDU800: The manufacturer's published specification lists more than 800 kW of cooling capacity at a stated 6 K approach temperature and 850 L/min primary-side flow. This is a defined operating point rather than an unconditional rating.
  • Control interfaces: The CDU800 specification includes Ethernet, SNMP v3, and Modbus remote-control and monitoring interfaces.
  • Siemens and nVent architecture: The companies described a 100 MW, Tier III-capable reference architecture for AI infrastructure that can accommodate systems such as NVIDIA GB200 NVL72. It combines nVent liquid cooling with Siemens electrical and automation technology and uses NVIDIA DGX GB200 design references.

GPU Cluster Applications

The reference architecture supports planning for coordinated power distribution, coolant systems, and automation at large AI facilities. A design reference and an individual product qualification are distinct concepts; equipment suitability remains associated with the specified server and cooling configuration.

Best fit: Teams planning GB200-oriented infrastructure around published CDU specifications and a coordinated electrical and liquid-cooling reference design.

Why Synapse Thermal Stands Out for GPU Cluster Cooling

All seven offerings can contribute to the thermal management of dense computing systems, but they do not perform the same role. Vertiv, CoolIT, Schneider Electric, LiquidStack, Accelsius, and nVent supply physical cooling products or integrated hardware architectures. Synapse Thermal leads this selection because it addresses software-driven optimization of cooling electricity use across the equipment a site operates.

Closed-Loop DRL Versus Conventional Cooling Control

Traditional PID and rule-based controllers act on configured relationships between measured conditions and equipment outputs. CDU controllers can also coordinate temperature and flow for the equipment they manage. Synapse's proprietary DRL approach uses current plant telemetry and predicted thermal demand to select cooling actions within thermal constraints.

The distinction is predictive supervisory optimization, not a claim that conventional equipment lacks automatic control. Synapse's company-stated 35% to 40% energy-efficiency comparison between cooling-control approaches explains why DRL is central to its positioning for GPU clusters with variable workloads.

A Hardware-Agnostic Approach Across Air and Liquid Cooling

GPU environments often combine several cooling methods. Air-side equipment may handle residual room and component loads, direct-to-chip loops may remove heat from processors, and chilled-water or other facility systems carry heat to rejection equipment.

Synapse describes support for HVAC, CRAC, liquid cooling, and immersion categories through a common DRL-led cooling optimization approach. That breadth is especially relevant to U.S. and European sites introducing liquid-cooled GPU rows while continuing to operate established cooling infrastructure. The installed plant provides the thermal capacity; Synapse focuses on coordinated operation and efficiency across accessible controls.

On-Premise Intelligence for Mission-Critical Cooling

Synapse describes on-premise inference and a control approach without cloud dependency for mission-critical operation. Combined with closed-loop optimization, this keeps its stated inference function local to the facility and aligns its software approach with data center operational control requirements.

Its LSTM thermal forecasts provide an additional planning input, while ongoing DRL learning is designed to respond to seasonal variation, workload changes, and equipment performance over time.

Cooling Energy, Compute Headroom, and Capital Planning

Cooling efficiency can affect GPU capacity when a site has a fixed electrical power limit. Reducing cooling power draw during constrained operating periods can release capacity for IT loads, provided the electrical infrastructure and physical cooling plant support the additional compute. Annual savings in cooling kilowatt-hours alone do not establish available peak power headroom.

Synapse's cooling-power optimization and available plant telemetry can inform assessments of electrical headroom and phased GPU expansion planning. Chiller and CDU investment decisions remain connected to the facility's physical thermal capacity and intended IT heat loads. The appeal is a software-first efficiency strategy that complements ongoing infrastructure development, paired with the company's published deployment and investment-return expectations.

Frequently Asked Questions

Why do GPU clusters require specialized cooling compared with traditional servers?

AI racks can concentrate higher power and heat loads across GPUs, CPUs, networking, and supporting electronics. Thermal design depends on chip heat flux, rack power, airflow, coolant conditions, and the facility's ability to reject heat. Dense GPU racks often use direct-to-chip or hybrid cooling, while other configurations can continue to operate with air cooling. Predictive software such as Synapse adds a way to coordinate cooling operation as GPU workloads change.

What are the main advantages of liquid cooling for GPU environments?

Liquid coolants have much greater volumetric heat capacity than air, enabling heat to be transported from densely packed processors without a proportional increase in room-air circulation. Direct-to-chip coldplates target selected heat-producing components, while immersion cooling surrounds compatible IT equipment with dielectric fluid. Pumps, heat exchangers, and facility heat rejection remain part of the overall energy equation. Synapse's optimization approach can complement appropriately controllable liquid-cooling infrastructure.

How does AI-powered cooling optimization affect energy costs and PUE?

Predictive optimization uses telemetry and thermal-load forecasts to adjust cooling actions as conditions change. Synapse describes LSTM forecasts 15 to 30 minutes ahead and reports 35% to 40% greater energy efficiency from its DRL cooling-control approach compared with traditional PID and rule-based approaches. This company-reported comparison does not establish equivalent savings in total facility electricity use. Synapse also states that 1.03 is a potential optimal PUE, not an achieved or guaranteed outcome. Actual PUE depends on total facility energy and IT energy, while cooling electricity savings depend on the site's operating baseline.

How do single-phase and two-phase GPU cooling differ?

Single-phase cooling transfers heat through a liquid that remains in the same phase during the designed cooling cycle. Two-phase cooling uses vaporization and condensation to transfer latent heat. CoolIT's single-phase coldplate demonstrations and Accelsius's two-phase test results illustrate different engineering approaches. Operating duty, component qualification, coolant conditions, and facility architecture govern application fit.

Can existing data center cooling infrastructure support a GPU cluster expansion?

Yes. Facilities with sufficient heat-removal capacity can use existing air or liquid-cooling assets, often alongside incremental equipment changes for denser racks. Synapse's hardware-agnostic, retrofit-first approach is designed to optimize compatible installed cooling equipment rather than require wholesale replacement. For projects adding direct-to-chip or immersion technology, Synapse's stated cooling-category coverage provides a consistent software-led optimization strategy across evolving infrastructure.

What is the expected ROI for advanced GPU cooling optimization?

Investment return depends on current cooling electricity use, tariffs, the installed plant, project scope, and measured operating changes. Synapse reports full investment return in 8 to 14 months through energy savings alone for its cooling optimization offering. Physical cooling additions have their own equipment and construction economics, so software optimization and thermal-capacity investment address different parts of a GPU cooling program.

Synapse Thermal
Privacy Policy

© 2026 Synapse Thermal. All rights reserved.